– Steam-fired GeneLink
Enhanced waste heat recovery type steam-fired Gene-Link (EXJE series)
*1 Large chilled water temperature differential (catalogue standard specification)
422〜3,516kW (120〜1,000USRT) [Steam-fired]
*1 Large chilled water temperature differential (catalogue standard specification)
422〜3,516kW (120〜1,000USRT) [Steam-fired]
– Features
Increasing the amount of the waste hot water recovered from the cogeneration system comparing with the conventional model, this unit reduces the amount of steam consumed by 30%.
Moreover, the chiller can be operated with wasted hot water only under low load condition (approx. 50% or lower).
・Use of hot water-heated solar heat
In addition to the waste hot water of co-generation systems, solar heat application can also be used.
Gas consumption
The input of waste hot water, reduces steam consumption by approx. 30% during rated cooling operations. Moreover, under low-load (below 50%) conditions, chiller can be operated by waste hot water only.
Moreover, the chiller can be operated with wasted hot water only under low load condition (approx. 50% or lower).
・Use of hot water-heated solar heat
In addition to the waste hot water of co-generation systems, solar heat application can also be used.
Gas consumption
The input of waste hot water, reduces steam consumption by approx. 30% during rated cooling operations. Moreover, under low-load (below 50%) conditions, chiller can be operated by waste hot water only.
1/2
– Amounts of waste hot water recovered
During partial load operations, priority is given to the use of waste hot water so the volume of steam consumed can be significantly reduced.
– Brochures and catalogues: Steam-fired GeneLink
Catalogues, brochures and other documentation. If you need any more information, please get in touch.
